Written Instructions

TP Turdinator is an enzyme‑based treatment designed to support the breakdown and dispersion of toilet paper and waste in RV, camper, trailer, and marine holding tanks. It is not a perfume or blue dye; it is a treatment meant to help your tank work more like it should when combined with proper water use and good dumping practices. This section explains what you can realistically expect when you start using the product and what factors influence performance.
Key points:
•TP Turdinator helps promote the breakdown of toilet paper and organic waste into smaller, more easily dispersed particles.
•Many users notice that the black tank drains more smoothly, with less visible toilet paper and fewer “chunks” during dumping.
•Improved breakdown can make it easier for water to carry waste out of the tank, reducing the chance of buildup on the tank floor and walls.
•Regular use may help reduce:
•Persistent odors coming from the toilet or vent
•Buildup and residue on tank walls and in corners
•Sensor fouling caused by waste sticking to sensor surfaces
•Performance can vary depending on:
•How much water you use with each flush
•The size, design, and condition of your holding tank
•Ambient temperature and how long the product can soak
•How full you let the tank get before dumping
•TP Turdinator works best as part of an overall maintenance routine that includes:
•Using plenty of water
•Keeping the black tank valve closed until dumping
•Allowing adequate contact time between treatments and dumps
You should think of TP Turdinator as a long‑term helper for tank cleanliness and function. It is not a magic instant cleaner, but when used correctly and consistently, it can contribute to cleaner‑flowing tanks, easier dumping, and reduced odor issues over time.

Enzymes are specialized proteins that act as biological catalysts. In holding tanks, they help break down complex organic materials into smaller, simpler components that are easier to move, disperse, and rinse out. TP Turdinator uses a selected blend of enzymes tailored to common RV tank waste.

How This Process Works in Your Tank

After you add TP Turdinator to the tank, the enzymes begin working shortly after they are dissolved and dispersed in the water.

Enzymes are not living organisms; they are tools that help speed up specific chemical reactions involving waste and toilet paper.

Different Enzyme Types

• Toilet paper and other cellulose-based materials
• Fats and greases from body oils or certain products
• Protein-based residues in waste

Enzyme Action in the Tank

• Attach to or interact with waste and toilet paper
• Break larger particles into smaller pieces over time
• Help loosen material that might otherwise stick to tank surfaces

Enzyme Breakdown vs. Odor Masking

• Enzymes focus on waste breakdown, not odor masking
• They continue working as long as they remain active and have moisture and material to work on

Why Water Levels Matter

• Water carries enzymes throughout the tank so they can contact more waste
• Areas that stay dry receive little or no enzymatic action

Enzyme Activity Timeline

• Typically begins within a couple of hours of dosing
• Continues for many hours and may persist between dumps as long as there is adequate moisture and waste present

Enzymes give you a way to support the natural breakdown process already occurring in your tank, but they still depend on good tank management: sufficient water, proper dosing, and reasonable contact time.

Water is the single most important factor in RV black tank health. Even the best treatment cannot compensate for a tank that operates with too little water. Using TP Turdinator with adequate water dramatically improves your chances of having a trouble‑free holding tank.
Why water matters so much:
•Water keeps waste and toilet paper suspended rather than allowing them to pile up dry on the bottom of the tank.
•Adequate water:
•Helps prevent the formation of hard, dry layers of waste
•Let’s waste and paper move freely toward the outlet during dumping
•Reduces the likelihood of clogs and slow drains
•The most common causes of RV black tank problems are directly related to low water usage, including:
•Persistent odors rising from exposed waste
•Sensor fouling when material sticks to probes or walls
•“Pyramid plugs” forming under the toilet
•Slow, incomplete, or uneven dumping
•Using more water improves the performance of TP Turdinator because:
•Enzymes can travel farther and contact more waste
•Waste and toilet paper remain wetted, making them easier to break down
•The tank can flush more thoroughly when you dump
•For most RVs, good water practice includes:
•Holding the flush pedal down long enough to bring a meaningful volume of water into the tank each time
•Starting with a base level of water after dumping
•Avoiding “dry camping” toilet habits (very short, minimal‑water flushes) for extended periods if possible
If you remember only one rule for RV black tank health, make it this: use more water. TP Turdinator can help the chemistry; water helps the mechanics.

The moment right after you dump your black tank is the best time to set yourself up for success on the next tank cycle. Starting correctly allows TP Turdinator and water to work together from the very first flush.
What to do after dumping:
•After you fully dump and, if possible, lightly rinse your black tank:
•Add the recommended amount of TP Turdinator directly into the toilet.
•Before using the toilet again:
•Hold the flush pedal down to introduce a base layer of water into the tank.
•A practical guideline is approximately 60 seconds of flushing for many RV toilets, or enough to add several inches of water to the bottom of the tank.
•This starting water layer:
•Prevents the first waste from landing on a completely dry tank floor
•Gives enzymes a medium to move in as they begin working
•Helps reduce the formation of hard residues on the bottom surface
•By dosing TP Turdinator immediately after dumping, you:
•Allow enzymes to be present from the very beginning of the new fill cycle
•Give them more time to contact and treat waste as it enters the tank
•During the rest of the tank cycle:
•Continue flushing with plenty of water after each use
•Avoid leaving the tank nearly dry for extended periods while still adding waste
This simple habit—dose after dumping and start with a meaningful water layer—makes a noticeable difference in how well your tank behaves over time.

Every RV and camping situation is different, but having a starting point makes it easier to dial in the right amount of product for your rig and usage pattern. The recommendations below are general guidelines you can adjust based on your experience.
Suggested starting amounts:
•For 1–2 people using the RV regularly:
•Start with approximately 1/2 to 1 scoop of TP Turdinator per day.
•For 3 or more people, or heavier daily use:
•Start with 1 to 1½ scoops or more per day.
How to adjust and fine‑tune:
•Monitor your tank’s behavior over a few trips:
•Watch for odors between dumps
•Observe how smooth and complete your dumps are
•Note how much visible toilet paper and solids you see coming out
•If you notice:
•Odors, slow dumping, or visible solids that do not rinse away easily
•Increase your water usage first, especially during and after each toilet use and before dumping.
•If problems persist after increasing water:
•Adjust TP Turdinator upward in small increments
•Allow longer soak times when possible before dumping
•In practice:
•Too little water and too little product are more common problems than using slightly too much
•Slight over‑treatment is usually safer than under‑treatment, provided water use remains adequate
Think of these daily amounts as a starting baseline, not a strict rule. Your goal is to find the combination of water and product that gives you clean, easy dumps with minimal odor and residue.

Your tank does not see the same load on every trip. A weekend outing with two people is very different from a week-long stay with a large family. TP Turdinator usage should scale with how much waste and toilet paper you put into the tank.

How usage affects treatment needs:

Tanks used by one or two people:
• Typically experience lower daily waste volume
• Often need less frequent dosing and may perform well on the lower end of the recommended range

Tanks used by larger families or groups:
• See higher amounts of waste and toilet paper each day
• Require more water to keep everything suspended and moving
• Often benefit from higher or more frequent TP Turdinator dosing

Short, light-use trips:
• May not need aggressive treatment if the tank is dumped promptly
• Still benefit from adequate water and a modest amount of product

Longer stays or heavy use:
• Increase the importance of consistent daily dosing
• Make soak time before dumping particularly valuable

Practical guidelines:

As usage increases:
• Increase water first, making sure flushes are generous and the tank is not run nearly dry
• Then adjust TP Turdinator upward if you still notice performance issues

Pay attention to:
• How quickly odors appear
• Whether solids increase at dump time
• Whether sensors begin to read inaccurately sooner than expected

The more waste and toilet paper your tank must handle, the more attention you should give to both water and treatment. Scaling both appropriately helps keep performance consistent across different camping situations.

If your RV or boat tank has been in service for a while, it may already contain layers of residue, toilet paper fragments, and other buildup. Switching to TP Turdinator can help, but older and neglected tanks often require patience and multiple treatment cycles.

What to expect with older or neglected tanks:

Year of use can lead to:
• Residue coating tank walls
• Deposits on the tank floor
• Accumulated toilet paper in corners or around baffles

The first few treatments with TP Turdinator:
• Begin to loosen old material
• May dislodge buildup that has been stuck for a long time
• Might cause you to see more solids initially as accumulated material starts coming out

To help this "reset" process:
• Use extra water during the first several dumps
• Allow longer soak times when possible, such as letting the tank sit partially full with product for a day or more before dumping

Improvement pattern:
• Results often improve gradually rather than instantly
• Each treatment can help remove a bit more of the old buildup
• Over multiple cycles, the tank may start to dump more cleanly and smell less

Consistency matters:

For older tanks:
• Plan on several treatment cycles before judging final performance
• Keep using TP Turdinator regularly rather than occasionally

As the tank becomes cleaner:
• Sensor readings may become more accurate
• Dumping may become faster and more complete
• Odor control may become easier to maintain

When you first start, think of TP Turdinator as part of a tank restoration process. Once things are cleaned up, you can transition into a steady maintenance routine.

Odors are one of the most common complaints from RV and marine owners. Even with treatment, you may experience smells if certain conditions exist in your tank or venting system. This section helps you understand why odors occur and what to do about them.
Common causes of odors:
•Waste or toilet paper above the water line:
•Exposed waste can release odors more easily into the air
•Low water levels often leave waste partially uncovered
•Inadequate water use:
•Short flushes that barely move material into the tank
•Running the tank with very little liquid in it
•Insufficient contact time:
•Dumping very frequently without giving enzymes time to work
•Venting issues:
•Blocked or restricted roof vents
•Wind patterns that draw odors back down into the RV
Steps to reduce odors:
•Increase water usage:
•Ensure each flush adds enough water to cover new waste
•Maintain a reasonable liquid level in the tank between dumps
•Use TP Turdinator regularly:
•Dose as directed after dumping
•Maintain consistent daily or per‑trip usage based on your load
•Allow adequate contact time:
•When possible, let the tank sit with product and water in it for at least several hours before dumping
•Check venting:
•Inspect the roof vent for obstructions such as debris, nests, or damage
•Consider whether wind deflectors or vent upgrades might help in severe cases
If odors persist even with good water use, regular TP Turdinator dosing, and a clear vent, there may be significant buildup or other mechanical issues that need further attention.

Seeing some solids at dump time does not automatically mean the treatment is failing. It is important to understand when solids are normal and when they signal a problem that needs correction.
When some solids are normal:
•If the toilet is used shortly before you dump:
•Recently added waste and paper may not have had enough time to fully break down
•You may see small clumps or pieces that are still in process
•Small particles:
•Should rinse out easily during dumping and flushing
•Are often just the last bits of material moving through the system
When solids suggest an issue:
•Large, persistent chunks or thick sludge:
•May indicate insufficient water use over time
•Can be a sign that not enough TP Turdinator is being used for your load
•May suggest very short contact times between dosing and dumping
•Repeated heavy solids at every dump:
•Point to possible buildup, partial blockages, or improper tank operation
What to do if you see too many solids:
•Increase water use:
•Make flushes more generous
•Consider adding extra water to the tank before driving or before dumping
•Adjust TP Turdinator:
•Increase dosing slightly for the next few trips
•Allow longer soak times where possible
•Evaluate tank history:
•If the tank is older or has been neglected, treat it as a restoration case and plan on multiple cycles of heavier treatment and soak time
The goal is to reach a point where dumps show mostly a smooth slurry with minimal observable solids and easy rinsing.

Ideally, when you pull the black tank valve, what comes out should look like a smooth, flowing slurry of liquefied waste and water. Large, intact masses of waste or paper usually point to issues with water use, product use, or tank operation.
What a healthy dump looks like:
•Waste flows out in a continuous stream with:
•Minimal large clumps
•Little to no slow‑moving “logs” or piles of paper
•Rinsing:
•Quickly clears remaining small particles
•Does not require excessive time to flush the tank clean
What problem dumps look like:
•Large chunks of waste or paper repeatedly appearing
•Waste stopping and starting as it flows, rather than running smoothly
•Heavy, thick sludge that seems reluctant to move
If you see excessive solids:
•Review your water use:
•Increase the amount of water used with each flush
•Consider adding extra water and then driving before dumping to help agitate the tank
•Review your TP Turdinator usage:
•Ensure you are dosing after each dump
•Increase the amount within the recommended range if you have a high usage load
•Allow more contact time:
•Avoid dumping too soon after dosing whenever practical
Better water usage combined with consistent, proper dosing generally results in cleaner dumps with fewer visible solids and easier rinsing.

It is common for RV owners to notice that the tank does not seem to empty fully, or that the last bit of material is slow to leave the tank. This is often related to water level, buildup, or the way the tank is being operated.
Common reasons for incomplete dumping:
•Low water levels:
•Not enough liquid volume to carry waste and paper out
•Waste piled up away from the outlet because of dry areas
•Buildup inside the tank:
•Layers of residue and old waste on the bottom or walls
Accumulated material around the outlet area
•Improper operation:
•Leaving the black tank valve open, especially at full hookups
•Dumping when the tank is only partially full, so there is little “flushing force”
How to improve emptying:
•Keep the valve closed:
•Allow the tank to fill to roughly two‑thirds to three‑quarters full before dumping
•This gives more liquid volume and weight to help move waste out
•Use more water:
•Ensure regular flushes contribute enough water to maintain a good liquid level
•Use TP Turdinator regularly:
•Help loosen and break down buildup over multiple cycles
•Support better suspension of waste in the water
•Occasionally, when needed:
•Add extra water before driving or before a dump to help agitate and flush the tank
More water, more contact time, and consistent treatment can significantly improve how completely your tank empties over time, especially if it has developed buildup from past habits.

Toilet paper choice is a frequent concern among RV owners. TP Turdinator is designed to work with a variety of common toilet paper types, but water and time are still critical factors in how quickly paper breaks down.
Compatible toilet paper types:
•Standard household toilet paper
•Quilted or thicker household toilet paper
•RV‑specific toilet paper marketed as “rapidly dissolving”
What changes with different paper types:
•Heavier, quilted, or multi‑ply papers:
•TP Turdinator is designed to break down all types of toilet paper
•May require more time and water to break down fully
•RV‑specific papers:
•Generally, break down more quickly
•Still need proper water and treatment to avoid problems
Best practices:
•Always follow campground or manufacturer requirements regarding toilet paper usage.
•Regardless of paper type:
•Adequate water is the most important factor in preventing paper buildup
•TP Turdinator helps support paper breakdown but cannot compensate for extremely low water use
•If you prefer thicker household paper:
•Be especially mindful of using generous water with each flush
•Consider slightly higher dosing and longer soak times in heavy‑use situations
TP Turdinator is designed to support toilet paper breakdown and cleaner tank operation, but your flushing habits will always play a major role in performance

Having full hookups can make it tempting to leave the black tank valve open all the time. Unfortunately, this is one of the fastest ways to create serious tank problems, including pyramid plugs and heavy buildup.
Why leaving the valve open is a problem:
•When the valve is open continuously:
•Liquids drain away quickly
•Solids and toilet paper tend to remain behind in the tank
•Over time:
•Solids can pile up and dry out
•Hard, stubborn masses of waste can form near the inlet or outlet
Best practice at full hookups:
•Keep the black tank valve closed during normal use.
•Allow the tank to fill to a healthy level, typically around two‑thirds to three‑quarters full, before dumping.
•When you are ready:
•Dump the tank in a single, strong release to help move solids out
•Follow with a rinse if your rig is equipped with a flushing system
Benefits of this approach:
•Reduces the risk of pyramid plugs and hard deposits
•Allows TP Turdinator and water to remain in contact with waste longer
•Supports more complete and efficient dumps
Even at full hookups, the safest and most effective way to operate your black tank is to keep the valve closed except when actively dumping.

Having full hookups can make it tempting to leave the black tank valve open all the time. Unfortunately, this is one of the fastest ways to create serious tank problems, including pyramid plugs and heavy buildup.
Why leaving the valve open is a problem:
•When the valve is open continuously:
•Liquids drain away quickly
•Solids and toilet paper tend to remain behind in the tank
•Over time:
•Solids can pile up and dry out
•Hard, stubborn masses of waste can form near the inlet or outlet
Best practice at full hookups:
•Keep the black tank valve closed during normal use.
•Allow the tank to fill to a healthy level, typically around two‑thirds to three‑quarters full, before dumping.
•When you are ready:
•Dump the tank in a single, strong release to help move solids out
•Follow with a rinse if your rig is equipped with a flushing system
Benefits of this approach:
•Reduces the risk of pyramid plugs and hard deposits
•Allows TP Turdinator and water to remain in contact with waste longer
•Supports more complete and efficient dumps
Even at full hookups, the safest and most effective way to operate your black tank is to keep the valve closed except when actively dumping.

While it may seem repetitive, the importance of water in holding tank health cannot be overstated. This section pulls the key points together and emphasizes why water is your most powerful tool.
Core reasons water is essential:
•Enzymes require water to move:
•Without water, enzymes remain localized and cannot contact most of the waste
•Water keeps waste flexible and mobile:
•Reduces the chance of waste drying in place
•Helps prevent the formation of hard layers and clumps
•Water reduces buildup:
•Helps wash toilet paper and waste off tank walls and surfaces during dumping
•Low water usage is strongly associated with:
•Odors from exposed waste
•Sensor fouling and inaccurate readings
•Slow dumping and partial blockages
•Pyramid plugs and other serious clogs
Simple habits that make a big difference:
•Hold the flush pedal longer to add more water per use.
•Start with a meaningful water level after each dump.
•Avoid running the black tank nearly dry while continuing to add waste.
If you are experiencing recurring tank issues, increasing water is often the first and most effective change to make.

RV tank sensors are notorious for giving inaccurate readings, especially showing “FULL” when the tank has just been dumped. Understanding why this happens can save frustration and unnecessary part replacements.
How most RV tank sensors work:
•Many common sensor systems:
•Do not measure waste level directly in a precise way
•Rely on probes or contacts inside the tank that detect when waste or liquid reaches them
•Over time:
•Waste, toilet paper, grease, and residue can coat the sensors
•This coating can create a constant “contact” that looks like a full tank to the monitor panel
Why sensors give false readings:
•Buildup on sensor surfaces:
•Acts like a bridge between contacts
•Causes the panel to read PARTIAL or FULL even when the tank is empty
•Inaccurate readings can persist if:
•Builup is not removed
• Water and treatment have not been used consistently
How TP Turdinator and good practices can help:
•Keeping the tank cleaner internally:
•May help reduce new buildup on sensor surfaces
•Can improve sensor accuracy over time
•Proper water usage:
•Helps minimize the amount of waste that adheres to sensor areas
•Supports better flushing of debris away from probes
It is important to distinguish between sensor fouling (a cleaning issue) and sensor or wiring failure (an electrical issue). Cleaning routines can help with the first; only repair or replacement addresses the second.

If your tank sensor still reads full even after dumping, it is often worth trying a deliberate cleaning cycle before assuming the sensor hardware has failed. A basic cleaning approach using TP Turdinator can sometimes improve readings.
Basic cleaning routine:
•Fill the tank above the highest sensor:
Add enough water through the toilet to raise the level so that all sensor points are submerged.
•Add 2–4 scoops of TP Turdinator:
•Use the higher end of the range for heavily fouled or older tanks.
•Allow the tank to soak:
•Aim for 1–2 days of soak time if your schedule allows.
•Normal use during this period can help agitate the solution.
•After soaking:
•Dump the tank thoroughly
•Rinse with clean water if you have a built‑in sprayer or can add additional water to flush
If needed:
•Repeat the process:
•Some tanks with heavy buildup may require several cleaning cycles
•Keep expectations realistic:
•Some sensor problems are caused by failed sensors, damaged wiring, or faulty monitor panels
•These issues cannot be corrected with cleaning alone and may require inspection and repair
Even if sensor readings do not become perfect, this cleaning routine often improves tank cleanliness and can reduce odor and dumping issues.

• Not all sensor issues originate from waste buildup. It is important to understand the different potential causes before replacing parts, so you can choose the right solution and avoid unnecessary work or expense.
  Common causes of sensor problems:
  •Waste and toilet paper accumulation:
  •The most common cause of “false full” readings
  •Often responds to cleaning and better water practices
  •Hard water scale and mineral deposits:
  •Can coat sensors and cause similar issues
  •May require additional cleaning methods if heavy
  •Electrical issues:
  •Damaged or corroded wiring
  •Failed sensors or connectors
  •Faulty monitor panel or electronics
  How to approach diagnosis:
  •Start with cleaning:
  •Use TP Turdinator and water to attempt a thorough internal cleaning
  •Observe whether readings improve after several cycles
  •If readings do not change:
  •Inspect wiring and connections if accessible
  •Consider consulting your RV manufacturer or a qualified technician
  •Remember:
  •Buildup‑related problems can often be improved without replacing components
  •Electrical failures typically require repair or replacement and will not respond to treatments
  Understanding the difference between dirt and damage helps you choose the right path and use your maintenance efforts wisely.
  

Older RV and marine tanks have a long history of use behind them, often with varied treatments, inconsistent water use, and periods of neglect. These tanks can still benefit from TP Turdinator, but they usually require more time and attention.
What older tanks often look like internally:
•Multiple layers of residue:
•On the floor
•On the walls
•Around baffles and fittings
•Long‑term toilet paper accumulation:
•In corners and low‑flow areas
•Around the outlet region
What to expect with treatment:
•Multiple treatment cycles:
•Typically needed to gradually loosen and remove old deposits
•May cause more debris to appear at the outlet initially as material breaks free
•Gradual improvement:
•Flow and dumping may improve step by step rather than all at once
•Odors may lessen over several trips as buildup decreases
•Sensor behavior:
•May slowly become more reliable as surfaces clean up
Best practices for older tanks:
•Use TP Turdinator consistently over multiple trips.
•Pair treatments with generous water use and periodic longer soak times.
•Be patient and monitor progress:
•Look for small improvements in flow, odor, and sensor behavior over time
Restoring an older tank is a process. With consistency and proper water habits, many long‑standing issues can be reduced or resolved.

Not all tank treatments are compatible with enzyme‑based products. Certain chemicals can reduce or destroy enzyme activity, limiting the benefit TP Turdinator can provide. Understanding which products to avoid helps you get the best results.
Chemicals that can interfere with enzymes:
•Bleach and strong oxidizing disinfectants:
•Can denature enzymes and greatly reduce their effectiveness
•Strong acids and harsh chemical cleaners:
•May damage enzymes and the overall biological balance in the tank
•Heavily perfumed “cover‑up” products:
•Often rely on fragrance and dye to mask odors
•May not address breakdown or buildup
•Blue dye products:
•Can hide waste visually
•Do not necessarily improve waste breakdown
Best practices for using TP Turdinator:
•Avoid mixing it with:
•Bleach or bleach‑containing products in the black tank
•Strong acids or highly caustic cleaners
•Harsh chemical treatments designed to sterilize the tank
•If you have previously used strong chemical treatments:
•Rinse the tank thoroughly before beginning enzyme treatments
•Allow a few cycles with TP Turdinator and good water use before evaluating results
TP Turdinator is designed to work within a more balanced, water‑rich environment. Avoiding incompatible chemicals helps enzymes do their job more effectively.